FB-00-UU6-DCA-B3-LILBL

Name: Cat.6 U/UTP, CPR Euro-Class Dca
Brand: FARBIN
SKU: FB-00-UU6-DCA-B3-LILBL

Description

Cat.6 U/UTP, CPR Euro-Class Dca

FARBIN FB-00-UU6-DCA-B3-LILBL, 4-Pair U/UTP 450MHz Cat.6 cable, 23AWG (~0.565 mm) solid bare copper, Rip cord, LSFH Class Dca s2, d2, a1 jacket, Blue Lilac color

Key Features

Cable has been tested as part of FARBIN copper Cable system with electrical channel requirements of 4-connector standard
Certified TCL & ELTCL Common Mode (CM) for running PoE+ and PoE++

Certified extended test result beyond the Cat.6 and Class E standard frequencies up to 450MHz
CPR Dca rated with FRNC & LSFH jacket

Mechanical Characteristics

Operating Temperature Range
Storage: -20°C to +60°C Installation: 0°C to +50°C Operating: -20°C to +60°C
Max. Tensile Load
~11kg (110N)

Min. Bend Radius
8 x Outer Diameter (Installation) 4 x Outer Diameter (Operation) Cold bend (-20 ±2°C ×4h) 8×Cable O.D., No visible cracks
NVP
68%

Standards

ANSI/TIA 568.2-D
ISO/IEC 11801 Class E
IEC 61156-5
EN50173-1
EN 50288-6-1
IEEE 802.3bt PoE Type 1 (15.4W) formerly 802.3af

IEEE 802.3bt PoE Type 2 (30W) formerly 802.3at
IEEE 802.3bt PoE Type 3 (60W)
IEEE 802.3bt PoE Type 4 (90W)
IEEE 802.3bt standard up to 0.5Amp. Per conductor
Cisco UPOE (60 Watts), Cisco UPOE+ (90 Watts)
Power over HDBaseT™ PoH (95 Watts)

Fire Standards

Classification/ EuroClass
EN 50575, EN 13501-6 CPR Rating Dca s2, d2, a1
Single Cable Flame Rating
IEC 60332-1-2
Smoke Emission
EN 13501-6 (s2) EN 61034-2 (Light transmittance ≥80%)

Acid Gas Emission
IEC 60754 (a1)
Bundled Cable Flame Rating
UL 1666 Riser (CMR) IEC 60332-3-24

Physical Characteristics

Conductor
4-Pair solid bare copper
AWG (mm)
23 (0.565 ±0.005)
Insulation
HDPE (O.D: 0.99 ±0.08mm)

Jacket
Surface clean, frap, satiation External O.D: 6.2 ±0.4mm CPR Dca s2, d2, a1 (FR-LSZH) Blue Lilac (RAL4005) Sequential marking at one meter
Rip Cord
Yes
Packing
The REELEX® box (305m ±1.5m)

Description

Cat.6 U/UTP, CPR Euro-Class Dca

FARBIN FB-00-UU6-DCA-B3-LILBL, 4-Pair U/UTP 450MHz Cat.6 cable, 23AWG (~0.565 mm) solid bare copper, Rip cord, LSFH Class Dca s2, d2, a1 jacket, Blue Lilac color

About

FARBIN Category 6 U/UTP cable exceed performance ANSI/TIA-568.2-D and ISO/IEC 11801 class E component-rated standards.

Certified channel performance in a 4-connector configuration up to 100m and exceeds category 6 and Class E standards beyond the 250 MHz frequencies and up to 450MHz.

The copper conductors shall be twisted in pairs, separated by a cross-divider and covered by a low smoke, flame-retardant with CPR Dca (LSFH) rated outer jacket.

Key Features

Cable has been tested as part of FARBIN copper Cable system with electrical channel requirements of 4-connector standard
Certified TCL & ELTCL Common Mode (CM) for running PoE+ and PoE++
Certified extended test result beyond the Cat.6 and Class E standard frequencies up to 450MHz

Mechanical Characteristics

Operating Temperature Range:

Storage: -20°C to +60°C Installation: 0°C to +50°C Operating: -20°C to +60°C

Max. Tensile Load:

~11kg (110N)

Min. Bend Radius:

8 x Outer Diameter (Installation) 4 x Outer Diameter (Operation) Cold bend (-20 ±2°C ×4h) 8×Cable O.D., No visible cracks

Standards & Applications

ANSI/TIA 568.2-D
ISO/IEC 11801 Class E
IEC 61156-5

Physical Characteristics

Conductor:

4-Pair solid bare copper

AWG (mm):

23 (0.565 ±0.005)

Insulation:

HDPE (O.D: 0.99 ±0.08mm)

Fire Standards

Classification/ EuroClass:

EN 50575, EN 13501-6 CPR Rating Dca s2, d2, a1

Single Cable Flame Rating:

IEC 60332-1-2

Smoke Emission:

EN 13501-6 (s2) EN 61034-2 (Light transmittance ≥80%)